Pioneer Studio Mounting
- Mounting kit for Autocue monitors
- Large hood supports use of wide-angle lenses
- Adjustable design makes it simple to position the lens
This mounting kit includes all the hardware needed for a large studio teleprompter, including camera/monitor mount, hood and glass.
If the 19″ Pioneer Studio Teleprompter doesn’t quite match your needs, you can combine this kit with the Autocue monitor of your choice to create a complete studio teleprompter with large hood.
Its design makes sure that setup goes smoothly with simple tuning of the hood height so that the lens is always in the middle of the glass, and a counterweight is included to centre the load of the prompter on the tripod or pedestal.
|Hood||Large (wide angle) composite hood with collapsible fabric lens seal Large (wide angle) composite hood with collapsible fabric lens seal|
|Rail Fixings||3/8"-16, with optional 1/4"-20 inserts 3/8"-16, with optional 1/4"-20 inserts|
|Camera Carriage||Camera fixings: 2x 3/8"-16, 1/4"-20, Rod fixing: 2x 19mm rod fixings (studio standard 104mm pitch) Camera fixings: 2x 3/8"-16, 1/4"-20, Rod fixing: 2x 19mm rod fixings (studio standard 104mm pitch)|
|Camera base to lens centre height supported||50 - 140mm 2 - 5.5"|
|Monitor Mounting||VESA100 with additional 3/8"-16 camera support fixings VESA100 with additional 3/8"-16 camera support fixings|
|Counterweight mounting rods||2x 19mm dia. 2x 19mm dia.|
|Mounting Dimensions||675 x 455 x 765mm 26.6 x 17.9 x 30.1"|
|Mounting Weight||7.5kg (excluding counterweight) 16.5lbs (excluding counterweight)|
- Mounting rail with bracket set
- Camera carriage
- Monitor spine
- Large hood
- Beamsplitter glass
- 19mm rod set
- 5kg counterweight